FW-VA-1117-39T

FW-VA-1117-39T

C1113-8PWZ

 
Model: C1113-8PWZ - Cisco Router ISR 1100
Detail: ISR 1100 G.FAST GE Router w/ 802.11ac, Z WiFi domain
Availability: In stock
SKU
c1113-8pwz-17695

C1113-8PWZ Specification

GE

N/A

GE/SFP combo

1

ADSL2/VDSL2+

1 G.FAST (Annex A)

LTE Advanced (CAT6)

N/A

802.11ac

2X2 MIMO

GE

8

PoE

4

PoE+

2

Integrated USB 3.0 AUX/console

Yes

Memory (default and maximum) DRAM: 4 GB Flash: 4 GB
Console · Micro USB console (USB 3.0).
Mini-USB port (reserved) · Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0).
802.11ac · 2x2 SU-MIMO/MU-MIMO with two spatial streams. · Maximal Ratio Combining (MRC). · 20-, 40-, and 80-MHz channels. · PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz). · Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx). · 802.11 Dynamic Frequency Selection (DFS). · Cyclic Shift Diversity (CSD) support.
Software · Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 (8.7 for 1101 series) MR1 or later.
DSL interfaces · G.FAST (spectrum up to 106MHz) Annex A, Annex B, Annex M and compatible with ADSL2/2+ and VDSL2. · ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 35b. · ITU G.9700/9701/997.2 G.FAST and supported profiles: 106a, and 106b.
External power supply · AC input voltage: Universal 100 to 240 VAC. · Frequency: 50 to 60 Hz. · Maximum output power: 66W (default). · Output voltages: 12 VDC. · Optional PoE and PoE+: ◦   Single 150W power supply required for Cisco 1100-8P series router ◦   Single 115W power supply required for Cisco 1100-4P series router · External output voltage: 48 VDC.
USB 3.0 · USB devices supported: ◦   USB eTokens and USB flash memory · Note: Devices USB 3.0 supports to be connected externally.
LEDs · WWAN (green/amber). · SIM status (green/amber). · Received signal strength indication (RSSI) bar (green). · 3G/LTE service (green/amber). · GPS (green/amber). · Speed and link for Gigabit Ethernet WAN port (green). · Speed and link for all Fast Ethernet LAN ports (green).
Physical dimensions (H x W x D) C111X Models ·  1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet on LTE models). ·  1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet on non-LTE models). C1101-4PLTEP and C1101-4PLTEPWX Models ·  1.73 x 9.75 x 6.6 in. (43.9 x 247.6 x 167.6 mm) (includes rubber feet models).
Weight C111X Models · 1.94 lb to 4.59 lb (1.94kg to 2.08 kg). · 4.50 lb (2.04 kg) with LTE Advanced. · 4.76 lb (2.16 kg) with Wave 2 802.11ac Dual Radio. · 4.89 lb (2.22 kg) with LTE Advanced plus Wave 2 802.11ac Dual Radio.
Environmental operating range · Nonoperating temperature: -4° to 149°F (-0° to 65°C). · Nonoperating humidity: 5% to 95% relative humidity (noncondensing). · Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m). · Operating temperature: 32° to 104°F (0° to 40°C). C1101 support 32° to 113°F (0° to 45°C). · Operating humidity: 10% to 85% relative humidity (noncondensing). · Operating altitude: 0 to 10,000 ft (0 to 3000 m).
Write Your Own Review
You're reviewing:C1113-8PWZ
WA button WA button