Model: IE-3010-16S-8PC - Industrial Ethernet 3000 Series
Detail: Rack mount switch 16 100SFP, 8 10/100 PoE, 2 GE combo uplinks, no PSU included
Availability: In stock

IE-3010-16S-8PC Specification


16 Fast Ethernet SFP ports, 8 10/100BASETX/PoE ports, and 2 dual-purpose Gigabit Ethernet uplink ports. (each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, one port active)

Performance and scalability

• Wire-speed switching, 8 Gbps switching fabric

• Forwarding rate based on 64-byte packets: 6.5 Mpps


• 1 GB SD Flash memory (128 MB enabled)

• Layer 2 LAN Base image supports 255 Vlans, 2000 MAC addresses, 256 IGMP groups.

• Layer 3 IP Services image supports 1000 Vlans, 3000 MAC addresses, 1000 IGMP groups, 3000 unicast routes

• Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging on both Fast Ethernet ports

Dimensions (H x W x D)

1.75 x 17.5 x 14.0 in. (4.45 x 44.5 x 35.6 cm), 1RU (rack unit) height


10 lb (4.5kg) (without power supply unit)

Connectors and cabling

10/100 ports:

• 10/100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 unshielded twisted pair (UTP) or shielded twisted pair (STP) cabling

• 100FX SFP ports (IE-3010-16S-8PC only):

• 100BASE-FX, -LX, -ZX, and -BX10: Duplex LC receptacle fiber connectors (multimode and single mode)

Gigabit ports:

• 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP/STP cabling

• 1000BASE-SX, -LX/LH, -ZX, and -BX10: Duplex LC receptacle fiber connectors (multimode and single-mode fiber)

Console ports:

• Management console port: RJ45 connector for serial connection

• Management console port: USB mini type B connector for USB connection


• Per-port status LEDs: Link integrity, port disabled, and activity indications

• System-status LED: System activity, system integrity,

• Alarm-in status LEDs: Four alarm inputs status indicator

• Alarm-out status LED: Alarm status indicator

• Power supply unit LED: Power output integrity and power supply presence

• PoE (IE-3010-16S-8PC only): PoE activity, PoE integrity, and PoE disabled

• SD Flash LED: SD flash integrity and SD flash presence

• RS232 LED: RS232 console selection

• USB LED: USB console selection

Environmental ranges

• -40 ºF to 140ºF (-40 to +60ºC) continuous operating temperature range

• -40 ºF to 185ºF (-40 to +85ºC) type test for 16 hours at 85ºC

• Operating altitude: 3000 m (9843 ft) at 40ºC (104ºF)

• Operating relative humidity: 5% to 95% noncondensing

Storage and transportation

• Temperature: -40 ºF to 185ºF (-40 to +85 ºC)

• Altitude: 15,000 ft (4570 m)

• Relative humidity: 5% to 95% noncondensing

Mean time between failure (MTBF)

• Cisco IE-3010-24TC: 207,731 hrs

• Cisco IE-3010-16S-8PC: 230,112 hrs


Five years limited warranty

Write Your Own Review
You're reviewing:IE-3010-16S-8PC
WA button WA button