LE0KS9306

LE0KS9306 Specifications

Packet forwarding rate

2880Mpps

Switching capacity

3.84Tbps

Service slot quantity

6

User management

Unified user management

802.1x, MAC, and Portal authentications

Charging based on traffic volume and online duration

User authorization based on user groups, domains, and time ranges

VLAN

Access, trunk, and hybrid

Default VLAN

VLAN switching

QinQ and selective QinQ

MAC-based VLAN assignment

MAC address

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source

MAC addresses MAC address limiting based on ports and VLANs

STP/ERPS

STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection

BPDU tunnel

G.8032 Ethernet Ring Protection Switching (ERPS)

IP routing

IPv4 dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP

IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+

Multicast

IGMPv1/v2/v3 and IGMP v1/v2/v3 snooping

PIM-DM, PIM-SM, and PIM-SSM

MSDP and MBGP

Prompt leave

Multicast traffic control

Multicast querier

Multicast protocol packet suppression

Multicast CAC

Multicast ACL

MPLS

Basic MPLS functions

MPLS OAM

MPLS TE

MPLS VPN/VLL/VPLS

Reliability

LACP and inter-chassis E-Trunk

VRRP and BFD for VRRP

BFD for BGP/IS-IS/OSPF/static route

NSF and GR for BGP/IS-IS/OSPF/LDP

TE FRR and IP FRR

Ethernet OAM in compliance with IEEE 802.3ah and 802.1ag (hardware-level) ITU-Y.1731

DLDP

QoS

Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p fields

ACL, CAR, and actions including Remark and Schedule

Queuing algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR

Congestion avoidance mechanisms, including WRED and tail drop

H-QOS

Traffic shaping

Configuration and maintenance

iPCA, monitor network quality for any service flow at any network node, at any time, and without extra costs

Terminal access services such as console port login, Telnet, and SSH

Network management protocols, such as SNMPv1/v2/v3

File uploading and downloading through FTP and TFTP

BootROM upgrade and remote in-service upgrade

Hot patches

User operation logs

Security and user management

802.1x authentication and Portal authentication

NAC

RADIUS and HWTACACS authentication for login users

Command line authority control based on user levels (unauthorized users cannot use commands)

Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and traffic flooding attacks

1K CPU queues

Ping and traceroute

RMON

Security protection

Firewall

Network Address Translation (NAT)

IPSec, SSL VPN

Intrusion Protection System (IPS)

Load balancing Analog Digital Conversion (ADC)

Energy saving

Energy Efficient Ethernet (802.3az)

LPU slots

6

MPU slots

2

Fan slots

2

System power supply slots

4

PoE power supply slots

4

Maximum port density

·V100R006C00 and V200R001C00: 288xFE, 288xGE, 240x10GE

·V200R002C00 to V200R007C00: 288xFE, 288xGE, 240x10GE, 12x40GE

·V200R008C00 to V200R009C00: 288xFE, 288xGE, 240x10GE, 12x40GE, 12x100GE

·V200R010C00 and later versions: 288xFE, 288xGE, 288x10GE, 48x40GE, 24x100GE

Installation

In an N66E or N68E cabinet, one or two chassis in a cabinet

CSS

CSS card or service port clustering

PoE

·Power input: Versions earlier than V200R006C00 support only AC power supply. V200R006C00 and later versions support both AC power supply and DC power supply (only 2200 W DC power modules).

·PoE power module backup: no backup, 3+1 backup, or 2+2 backup

·Maximum output power: 8800 W

Maximum power consumption (fully loaded, no PoE power supply)

2200 W

Power specifications

·DC input voltage

Rated voltage: -48 V DC/-60 V DC

Maximum voltage range:

1600 W/2400 W DC power module: -38.4 V DC to -72 V DC

2200 W DC power module: -40 V DC to -72 V DC

·AC input voltage

Rated voltage: 110 V AC/220 V AC, 50/60 Hz

Maximum voltage range: 90 V AC to 290 V AC; 47 Hz to 63 Hz (The output power reduces to half of the maximum output when the input voltage is in the range of 90 V AC to 175 V AC.)

Dimensions (W x D x H, excluding rack-mounting brackets)

·With cable management frames: 442 mm x 585 mm x 441.7 mm (17.4 in. x 23.0 in. x 17.39 in. (10 U))

·Without cable management frames: 442 mm x 489 mm x 441.7 mm (17.4 in. x 19.3 in. x 17.39 in. (10 U))

Weight (empty/fully loaded)

15 kg/42 kg (33.1 lb/92.6 lb)

Reliability and availability

MTBF: 24.2 years

MTTR: 52 minutes

Availability: 0.9999959

Environment parameters

·Operating temperature and altitude:

-60 m to +1800 m (197 ft. to 5906 ft.): 0°C to 45°C (32°F to 113°F)

1800 m to 4000 m (5906 ft. to 13123 ft.): Operating temperature decreases by 1°C (1.8°F) every time the altitude increases 220 m (722 ft.).

4000 m (13123 ft.): 0°C to 35°C (32°F to 95°F)

·Operating relative humidity: 5% RH to 95% RH (noncondensing)

·Storage temperature: -40°C to +70°C (-40°F to +158°F)

·Storage altitude: < 5000 m (16404 ft.)

·Storage relative humidity: 5% RH to 95% RH (noncondensing)

Noise at normal temperature (acoustic power)

≤ 72 dBA

EMC compliance

CISPR22 Class A

CISPR24

EN55022 Class A

EN50024

ETSI EN 300 386 Class A

ICES 003 Class A

AS/NZS CISPR22 Class A

VCCI Class A

IEC61000-6-2

IEC61000-6-4

IEC61000-4-2

ITU-T K 20

ITU-T K 21

ITU-T K 44

CNS13438 CLASS A

KN 22 CLASS A

Environmental standards compliance

RoHS

REACH

WEEE

Safety standards compliance

IEC 60950-1

EN 60950-1

UL 60950-1

CSA C22.2 No 60950-1

AS/NZS 60950.1

BS EN 60950-1