PVDM4-64.jpg

NIM-ES2-8-P

 NIM-ES2-8.jpg

NIM-ES2-8

 NIM-2MFT-T1/E1.jpg

NIM-2MFT-T1/E1

NIM-ES2-8-P

Model: Cisco 8-Port Gigabit Ethernet Switch NIM with PoE Support NIM-ES2-8-P
Detail: Cisco 4000 Series Integrated Services Router 8-Port Gigabit Ethernet Switch Module NIM with PoE Support NIM-ES2-8-P
was $1,174.00 Special Price $280.00
Availability: In stock
SKU
nim-es2-8-p

NIM-ES2-8-P Specifications

Product Number

NIM-ES2-8-P

Product Description

8-port PoE/PoE+ Layer 2 Gigabit Ethernet LAN Switch NIM

Form Factor

Single-wide NIM form factor

Dimensions (H x W x D)

0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)

Weight

149g (0.33 lb)

IEEE protocols

●  Gigabit Ethernet: IEEE 802.3 and 10BASE-T

●  Gigabit Ethernet: IEEE 802.3u, 100BASE-TX, and 1000BASE-TX

●  IEEE 802.1d Spanning Tree Protocol

●  IEEE 802.1p CoS for Traffic Prioritization

●  IEEE 802.1q VLAN

●  IEEE 802.1X Security

●  IEEE 802.3x Full Duplex

●  IEEE 802.3af Power over Gigabit Ethernet Standard

RFC

RFC 2284, PPP Extensible Authentication Protocol (EAP)

MIBs

●  RFC 1213

●  IF MIB

●  RFC 2037 ENTITY MIB

●  CISCO-CDP-MIB

●  CISCO-IMAGE-MIB

●  CISCO-FLASH-MIB

●  OLD-CISCO-CHASSIS-MIB

●  CISCO-VTP-MIB

●  CISCO-HSRP-MIB

●  OLD-CISCO-TS-MIB

●  CISCO-ENTITY-ASSET-MIB

●  CISCO-ENTITY-FRU-CONTROL-MIB

●  BRIDGE MIB (RFC 1493)

●  CISCO-VLAN-MEMBERSHIP-MIB

●  CISCO-VLAN-IFINDEX-RELATIONSHIP-MIB

●  RMON1-MIB

●  PIM-MIB

●  CISCO-STP-EXTENSIONS-MIB

●  OSPF MIB (RFC 1253)

●  IPMROUTE-MIB

●  CISCO-MEMORY-POOL-MIB

●  ETHER-LIKE-MIB (RFC 1643)

●  CISCO-ENTITY-FRU-CONTROL-MIB.my

●  CISCO-RTTMON-MIB

●  CISCO-PROCESS-MIB

●  CISCO-COPS-CLIENT-MIB

Manageability

●  SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management console provides detailed out-of-band management.

●  An embedded RMON software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis.

●  A SPAN port can mirror traffic from one or many ports to another port for monitoring all eight RMON groups with an RMON probe or network analyzer.

●  Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.

●  Two LEDs per port provide convenient visual indication of the port link and PoE status.

●  Crash information support enables a switch to generate a crash file for improved troubleshooting.

●  Show-interface capabilities provide information about the configuration capabilities of any interface.

Connectors and cabling

●  10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted pair (UTP) cabling

●  100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling

●  1000BASE-TX ports: RJ-45 connectors; two-pair Category 5e and Category 6 UTP cabling

LED indicators

●  Link status LED: One LED per port for indicating link status

●  PoE LED: One LED per port system for PoE status indication

Internal power supply

Optional PoE system power supply available for all Cisco 4000 Series routers

Internal redundant power supply

For the Cisco 4431 and 4451 routers only

DC power support

●  DC system power input available on the Cisco 4351, 4431, and 4451 routers

●  PoE option not available with DC system power input

Software support

Minimum Cisco IOS-XE Software Release 3.15 for Cisco 4000 Series routers: IP Base License of the Universal image

Operating temperature

 

32° to 104°F (0° to 40°C)

Operating humidity

10 to 90 percent, noncondensing

Nonoperating temperature

-4° to 149°F (-20° to 65°C)

Operating altitude

15,000 ft (4,570m)

Regulatory compliance, safety, and EMC

When installed in a Cisco 4000 Series router, the Cisco Gigabit Ethernet LAN Switch NIM meets the standards (regulatory compliance, safety, and EMC) of the router itself. Refer to the data sheets for the Cisco 4000 Series routers for more details.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
WA button WA button