SPA-2XOC48POS/RPR

SPA-2XOC48POS/RPR

CAB-ACS-16

CAB-ACS-16

A9K-4T-B

A9K-4T-B

SPA-2XOC48POS/RPR

 
Model: SPA-2XOC48POS/RPR Cisco ASR 9000 Series Shared Port Adapter
Detail: Cisco ASR 9000 Adapter SPA-2XOC48POS/RPR 2-port OC48/STM16 POS/RPR Shared Port Adapters
was $96,140.00 Special Price $33,311.00
Availability: In stock
SKU
spa-2xoc48posrpr

SPA-2XOC48POS/RPR Specifications

Type Cisco Router Shared Port Adapter
Product Compatibility Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router(2 port only) Cisco CRS Carrier Routing System(2 and 4 port only)
Port Density per SPA 1, 2, and 4 ports
Physical Interface OC-48c/STM-16c SFP optics module (see optical parameters below) Visual status indicators (LEDs) • SPA status LED • Per port LEDs • Carrier/Alarm • Active/Loopback • Protect (DPT/RPR mode) • Pass Through (DPT/RPR mode)
Protocols (see table below for RPR/SRP support info) High-Level Data Link Control (HDLC), RFC 2615 Point-to-Point Protocol (PPP), RFC 1662 Frame Relay, RFC 2427 IPv4/IPv6 IEEE 802.17 - Resilient Packet Ring (RPR) IETF 2892 - Spatial Reuse Protocol (SRP)
Features and Functions Synchronization • Local (internal) or loop timed (recovered from network) • Stratum 3 clock accuracy (± 4.6 ppm) over full operating temperature • Pointer activity monitoring Local (diagnostic) and line (network) loopback Section DCC (SDCC) - Platform-dependent feature Payload mapping • 1 + X^43 self-synchronous scrambler SONET/SDH compliance • Telecordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, T1.231 • ITU-T G.707, G.957, G.825 (as applicable) Supported SONET/SDH alarm and signal events • Signal Failure Bit Error Rate (SF-BER) • Signal Degrade Bit Error Rate (SD-BER) • Signal Label Payload Construction (C2) • Path Trace Byte (J1) • Section • Loss of Signal (LOS) • Loss of Frame (LOF) • Error Counts for B1 • Threshold Crossing Alarms (TCA) for B1 • Line • Line Alarm Indication Signal (LAIS) • Line Remote Defect Indication (LRDI) • Line Remote Error Indication (LREI) • Error Counts for B2 • Threshold Crossing Alarms (TCA) for B2 • Path • Path Alarm Indication Signal (PAIS) • Path Remote Defect Indication (PRDI) • Path Remote Error Indication (PREI) • Error Counts for B3 • Threshold Crossing Alarms (TCA) for B3 • Loss of Pointer (LOP) • Positive Stuffing Event (PSE) • Negative Stuffing Event (NSE) • Path Unequipped Indication Signal (PUNEQ) • Path Payload Mismatch Indication Signal (PPLM)
Network Management RFC 2558 MIB (SONET/SDH) Simple Network Management Protocol (SNMP)
Reliability and Availability Online insertion and removal (OIR) Field-replaceable SFP optical modules 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols Single SPA software reset
Physical Specifications Weight: 0.75 lbs (0.34 kg) Height: 0.8 inches (2.03 cm) Width: 6.75 inches (17.15 cm) Depth: 7.28 inches (18.49 cm)
Power 18 Watts maximum (4-port) 15.5 Watts maximum (1-, 2-, and 4-Port) 12 Watts maximum (1-port)
Environmental Specifications Operating temperature: 41° to 104°F (5° to 40°C) Storage temperature: -38° to 150°F (-40° to 70°C) Operating humidity: 5 to 85% relative humidity Storage humidity: 5 to 95% relative humidity
Compliance and Agency Approvals Safety UL 60950 CSA 22.2-No.60950 EN60950 IEC 60950 CB Scheme ACA TS001 AS/NZS 3260 EN60825IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC FCC Part 15 (CFR 47) ICES 003 EN55022 CISPR 22 AS/NZ 3548 VCCI EN55024 EN50082-1 EN61000-6-1 EN61000-3-2 EN61000-3-3 Network Equipment Building System (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): SR-3580 - NEBS: criteria levels (Level 3 compliant) GR-63-Core - NEBS: physical protection GR-1089-Core - NEBS: EMC and safety European Telecommunications Standard Institute (ETSI) EN300 386/EN300 386-2 Class B ETS 300 019 Storage Class 1.1 ETS 300 019 Transportation Class 2.3 ETS 300 019 Stationary Use Class 3.1
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
WA button WA button