ASR1000-RP2
| Model: | ASR1000-RP2 Cisco ASR 1000 Processor |
| Detail: | Cisco ASR 1000 Processor ASR1000-RP2 |
was
$40,250.00
Special Price
$7,573.00
Availability:
In stock
SKU
asr1000-rp2
Chat with IT Networks
ASR1000-RP2 Specifications |
|
| Chassis support | Cisco ASR 1004, ASR 1006, ASR 1006-X, ASR 1009-X and ASR 1013 chassis (Note: The Cisco ASR 1002 and ASR 1002 Fixed chassis come with the Cisco ASR 1000 Series RP1 built into the chassis.) (Note: Cisco ASR 1001, ASR 1001-X, and ASR 1002-X (part numbers ASR1001, ASR1001-X, ASR1002-X) have an integrated Route Processor built in to the chassis that is not upgradable) |
| Software compatibility | Cisco IOS XE Software, which is based on Cisco IOS Software Release 12.2SR (Please consult your Cisco account representative for additional details.) |
| Software protocols | Refer to Cisco IOS Software 12.2SR protocol support |
| Connectivity | ● Console port (RJ-45 connector) ● Auxiliary port (RJ-45 connector) ● 10/100/1000 Ethernet port (RJ-45 connector) ● RJ-48 connector for BITS input clock and output source |
| Memory options | ● Four 2-GB DDR2 mini-DIMMs ● Four 4 GB DDR2 mini-DIMMs ● Upgradable memory from 8-GB to 16-GB DRAM |
| Storage options | ● 80-GB HDD (hot-swappable) ● 1-GB USB Compact Flash memory |
| Performance | With 8-GB memory: ● Up to 1,000,000 IPv4 routes or 1,000,000 IPv6 routes ● BGP RR Scalability up to 8,000,000 IPv4 routes or 6,000,000 IPv6 routes With 16-GB memory: ● Up to 4,000,000 IPv4 routes or 4,000,000 IPv6 routes ● BGP RR Scalability up to 24,000,000 IPv4 routes or 17,000,000 IPv6 routes |
| Reliability and availability | ● 1 + 1 redundancy in dual-route-processor configuration ● Support for OIR ● Support for NSF and SSO ● Support for ISSU |
| MIBs | ● RFC 2737 compliant |
| Network management | ● Telnet and SSH (CLI) ● Console port (through the CLI) ● SNMP ● RFC 2665 |
| LEDs | ● PWR - Power Green - All power rails are within specifications ● STAT - Status Green - Cisco IOS Software has booted Yellow - BootROM has successfully loaded Red - System failure or during boot process ● ACTV- Active Green - Active route processor ● STBY - Standby Yellow - Standby route processor ● CRIT - Critical Alarm Red - Critical alarm or during boot process ● MAJ - Major Alarm Red - Major alarm ● MIN - Minor Alarm Amber - Minor alarm ● HD - Internal HDD FLASH Green - Activity indicator Off - No activity ● USB - External Compact Flash FLASH green - Activity indicator ● BF - Boot Flash (Internal) FLASH green - Activity indicator Off - No activity ● CARRIER BITS I/F Mode Off - Out of service or not configured Green - Normal or Bridging Amber - Fast ● DTI Mode Off - Warm-up, free-run, or holdover Green - In service or working properly Amber - Fault or loop condition ● LINK - Management Ethernet link status Solid green - Link with no activity FLASH green - Link with activity Off - No link ● DISK2 - Internal HDD FLASH green - Activity indicator Off - No activity ● CARRIER - BITS interface Off - Out of service Green - In frame and in service Amber - Fault or loop condition |
| Physical dimensions (H x W x D) | 0.92 x 16.7 x 14.19 in. (0.02 x 0.428 x 0.36m) |
| Weight | 5.0 lb (2.3 kg) |
| Approvals and compliance | Safety ● UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment ● AS/NZS 60950-1 ● IEC/EN 60950-1 Information technology equipment ● 73/23/EEC Electromagnetic Emissions Certification ● CFR 47 Part 15: (FCC) Class A ● ICES 003 Class A ● AS/NZ CISPR 22: Class A ● CISPR 22 (EN55022) Class A ● VCCI Class A ● KN22 ● IEC/EN 61000-3-2 (or 3-12 as applicable): AC Power Line Harmonics ● IEC/EN 61000-3-3 (or 3-11 as applicable): AC Voltage Fluctuations and Flicker Immunity ● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8-kV Contact, 15-kV Air) ● IEC/EN-61000-4-3: Radiated Immunity (10 V/m) ● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2-kV Power, 1-kV Signal) ● IEC/EN-61000-4-5: Surge AC Port (4-kV CM, 2-kV DM) ● IEC/EN-61000-4-5: Surge Signal Ports (1-kV indoor, 2-kV outdoor) ● IEC/EN-61000-4-5: Surge DC Port 1-kV ● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) ● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30 A/m) ● IEC/EN-61000-4-11: Voltage Dips, Short Interruptions, and Voltage Variations Network Equipment Building Standards The module meets the following NEBS: ● GR-1089-CORE ● GR-63-CORE ETSI and EN Standards ● EN300 386: Telecommunications Network Equipment (EMC), OTC ● EN55022: Information Technology Equipment (Emissions) ● EN55024: Information Technology Equipment (Immunity) ● EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard |
| Environmental | ● Storage temperature: -38 to 150°F (-40 to 70°C) ● Operating temperature, nominal: 41 to 104°F (5 to 40°C) ● Operating temperature, short-term: 23 to 131°F (-5 to 55°C) ● Storage relative humidity: 5 to 95% RH ● Operating humidity, nominal: 5 to 85% RH ● Operating humidity, short-term: 5 to 90% RH ● Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
Write Your Own Review