QSFP-100G-ER4L-S=
| Model: | QSFP-100G-ER4L-S= - Cisco 100 Gigabit Optical Modules |
| Detail: | 100GBASE QSFP Transceiver, 40KM reach over SMF, Duplex LC |
Chat with IT Networks
QSFP-100G-ER4L-S= Specification |
|
|
Description |
Cisco 100GBASE QSFP Transceiver, 40KM reach over SMF, Duplex LC |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
|
QSFP Port cabling specifications |
|
|
Nominal Wavelength (nm) |
1295, 1300, 1304, 1309 |
|
Cable Type |
SMF |
|
Core Size (Microns) |
G.652 |
|
Modal Bandwidth (MHz*km)*1 |
|
|
Cable Distance |
40km (with host FEC) 30km (without host FEC) |
|
Power Consumption (W) |
4.5 |
|
Pull Tab Color |
Rad |
|
*1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm |
|
|
Optical characteristics |
|
|
Product |
QSFP-100G-ER4L-S*4 |
|
Transmit Power (dBm) per lane*2 |
Max:+6.5 Min:-2.5 |
|
Receive Power (dBm) per lane*2*3 |
Max:-3.5 Min: -20.5*5 (with FEC) -17*5 (without FEC) |
|
Receive Power (dBm) per lane |
Four lanes: 1295, 1300, 1304, 1309 |
|
*2 Transmitter and receiver power is average optical power, unless specified *3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation *4 Minimum channel insertion loss is 6.4dB for QSFP-100G-ER4L-S *5 V01 of QSFP-100G-ER4L-S allows Tx Power range with +4.5 (Max) to -2.9 (Min) and Rx Power range with -4.9 (Max) to -19.9 (Min) |
|
|
Environmental Conditions and Power Requirements |
|
|
Commercial temperature |
0 to 70°C (32 to 158°F) |
|
Storage temperature |
-40 to 85°C (-40 to 185°F) |
|
Regulatory and Standards compliance |
|
|
Standards |
•SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) - Rev 1.8 May 10, 2013 •SFF-8636: Common Management Interface - DRAFT Rev 1.9 May 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6 |
|
Safety |
•Cable jacket of QSFP copper modules is UL E116441 Compliant •QSFP copper cables are ELV compliant |